The MT-07 is entering its 4th season, with all the keys to continue its surge of success. 2017 sees subtle changes appear. Did you notice the little reflectors at the bottom of the fork tubes? The MT-07 is up to Euro4 standards. This also results in a small engine update to lower polluting emissions.
Beginner’s motorcycle? Not that much, and above all an introduction to the pleasure of driving, with this little character offered by the twin cylinder. Kawa understood this a while ago with his ER-6, which has been in the top of the market for a while. A little further in time, the Suzuki SV 650 had taken the industry by storm. The recipe that works for these 3 machines: a nice twin, a light motorcycle, a mouth that flies !
Yam therefore enters this space, leaving the XJ6 to work out with the flexibility of its 4 legs. The MT-07 is drier, more playful, with pieces of cross-plane in its nice mill.
A few figures to whet your appetite: 75 horsepower and almost 7 mkg of torque. Data that we are used to seeing on this kind of machine and engine. The Yam block is distinguished by a 270 ° setting, as on the TDM 900 and XTZ 1200, and unequal ignition intervals. This in order to distribute the torque optimally, a philosophy adopted by the M1 then the R1, the MT-09 and now the MT-07.
The other technical elements of the CP2 unit are more traditional while remaining modern: 4 valves per cylinder, forged pistons, centralization and lowering of the masses with an exhaust under the motorcycle, big work on the fuel, and a 6-speed gearbox..
The twin of the MT-07 promises a reactive and predictable behavior, with this roughness which makes this architecture more endearing than a policed 4 cylinders. The traits of this character are furthermore expressed by the design of the machine, nervous and tortured. Almost as if pieces of MT-09 were captured by the Harajuku neighborhood to create this silhouette of angles, rebellion and manga. The frame would almost get lost in it, with its worked pieces and its striking minimalism.
The engine plays an essential role here, as the main tubular steel structure rests on it, as does the swing arm. The latter, asymmetric and monocross type, is anchored to the housings. A very nice and rewarding element, much more flattering than the rotten square section arms that we had on the basics of yesteryear.
To complete this chassis, Yam installs fairly standard peripherals, from sufficient to serious. No need for an inverted fork here, a standard 41mm will do just fine. Two 282 mm petal discs are located at the front, wedged by monobloc 4-piston calipers. Nice stuff for a machine of this size. Especially since there is not much to brake. The bike weighs only 179 kilos … all wet. It’s 26 kilos less than an XJ6.
The MT-07 is fitted with 17-inch 10-spoke cast aluminum rims. The rubber measures 120 mm at the front, and a surprising 180 mm at the rear. An incongruous dimension for the watts distributed by the CP2 – a 180, that’s what you find on an R6. But the look, always the look.
Not stingy with emotions, escaping from gloomy or trendy corners, the MT-07 brings a nice boost to the entry-level Yamaha. This machine for young bikers, those who want to escape from conformism, or night people looking for a different taste, has made a place for itself in the pack of Cubs. The price is placed at the level of the daisies, with the key to a great success since 2014. To be followed closely, because many competitors are pulling the face. And for those looking for a vintage fragrance with the same pep as this MT-07, there are now the XSR 700 versions; For backpackers, the MT-07 drives the point home with the 700 Tracer.
What you must remember
Calculate the cost of
Test the price of the motorcycle insurance specialist
sure 26 notice
MT-07 700 2016
Model marketed in
about 190 km / h
The technical aspect
Yamaha MT-07 700 2017
- Tank: 14 liters
- Width: 745 mm
- Height: 1,090 mm
- Wheelbase: 1,400 mm
- Weight in running order: 179/182 kg
- Train before
- secondary by chain
- Rear axle
(80 x 68.6 mm)
at 9000 rpm
at 6500 rpm